Sunday, February 27, 2011

Yesterday's Avalanche Training - Adults Playing in Snow

Yesterday's avalanche training at Monarch Pass turned epic with 40" of snow in the last 72 hours, 24" in the last 24 hours, 20-30 mph winds, with gusts to 45 and 18 degree temperatures. Now you may think that this would be cause to re-schedule, but the thought is that we may be working in these types of condition, so we should train in them.

Leaving home it was had to believe what it would be like, since it was bright and the sun was out.

We stopped at Mac and Don's on the way to Monarch, and I had the opportunity to try out their new oatmeal breakfast, not sure if this really turned out to be an opportunity.

As many of you know I did a review of oatmeal's (Jamba, Starbucks, Caribou) a couple of years ago, and I thought this would be a great time to try the largest food retailer in the worlds offering.

In a nutshell, this is the worst excuse for oatmeal I have ever had. It was soupy(Actually, I have had thicker soups.) to the extreme with some cut up apples and berry's (I think). It is an embarrassment for MacDonald's to even think about serving this poor example (not sure it could even be considered an example) of oatmeal. It was thrown away.

So, Pat how did you really feel about MacDonald's Oatmeal.

In the five miles between Salida and Poncha Spring the world changed. The sky went overcast and the road was now snow covered. We began the slog up Hwy 50 to Monarch Pass.

This I suppose should have been expected with it being Saturday, and the prodigious snow fall in the previous days...everyone was out for fresh pow.

We had taken off earlier then the rest of the team because we needed to pick up an ice axe purchased off of craigslist in Salida.

Being the first ones at the pass we were the first to
get stuck in the parking area, since I could not see
anything and drove into a snow bank and had to dig out.

We were also the second to get stuck, since after digging us out, I backed into another snow bank.

By the time I dug out this time the others had shown up, and the my first error of the day became apparent.

It was snowing hard and I had not put on my waterproof coat while shoveling during the excursions into the various snow banks. I was now real wet. As we geared up I put on a gore tex pants and coat over the wet fleece I had been wearing. The wet underneath would turn to ice as the day progressed.

We hit the trail about 10am...wait there was no trail only unbroken snow.

We spent the morning breaking trail up the eastern side of the pass in the area of the summer chairlift.

Even in snowshoes with deep snow extensions on their tails, when breaking trail you would sink in to your thighs. If you weren't breaking trail it wasn't as bad. We did though trade off lead often, but it still made for a burn.

We were carrying 24 hour packs (everything needed to survive 24 hours in the current environment), which helped to add to the calorie burn, during the hike up the slope to the area we would use for training.

The folks down in the parking lot, who were going back-country skiing, wisely waited for us to make a trail that they could skin-up afterwards.

Marlys is turning into quite the little snow bunny.

Yes, Marlys is carrying a 24 hour pack and is using the snowshoes she got for Christmas about 10 years ago.

Although the last two avalanche training sessions we have used our gore tex lined backpacking boots, you need to keep moving to keep your feet warm. Note to selves: Get plastic mountaineering boots for next year.

Those of you who know Marlys, know she can get cold in 90 degree weather, if the sun goes behind a cloud, so you can really appreciate her ability to work in these conditions.

By this point our Camelbaks had frozen up, and that was the only liquid we had brought up. Marlys would solve this dilemma later, which saved our bacon, especially mine since I can dehydrate easily and quickly, leading to the dreaded stomach cramps and need to find a tree. Which I would end up having to do later in the day. This would mean undressing the lower half, wearing snowshoes, on a slope, in these conditions, it would be...uncomfortable. I now appreciate Marlys' hunt for women's clothing with a trapped door. If you know of any drop a line.

We got to a place that was fairly sheltered and packed it down to serve as an area to operate out of for the day. The skiers and boarders would stop and check in at this packed down area all day. There was even a chocolate Lab that couldn't seen to get enough of the snow each time it went by.

This didn't mean the hard work was over.

We now could get started on the avalanche training.

Last time (a month ago) we spent the time practicing with avalanche beacons, snow probes and shovels. This time we were going to do that again, adding in searches for victims without beacons.

A little soapbox time. Don't even think about going into the back-country without being equipped and knowing how to use an avalanche beacon. You and your skiing, boarding, snowshoeing, snowmobiling(largest group of victims) partners are the people who have a chance at saving a life...time is short when buried. We have watched a number of real-life avalanche rescue videos over the last two months and the chances of your partners finding and getting you unburied without a beacon is very low. Generally by the time a trained SAR Team can get there, it will more then likely be a body recovery versus a rescue.

The work of the morning began with the snow pits being dug to assess the different layers of snow for stability.

Two pits were dug in different locations. Both had to be dug to ground. Marlys' group chose correctly, as the Crusader said in the Indiana Jones movie.

Therefore, it could be surmised my group did not.

Our pit ended up being between 9-10 feet deep. This means moving a lot of snow...while wearing snowshoes...using little shovels...with short handles...with three full grown (maybe I am a little more then full grown-by girth) men doing this dance standing in a pit. I am amazed no one took a shovel hit.

Marlys and her group dug their pit on a open slop, They barely had to go Marlys deep (5') to hit ground.

After the pits are dug, a number of readings are taken; e.g. temperatures and gradients, snow crystals inspection (there is even this microscope type of gadget), credit card test for layer assessment etc.

Then we dug to create a block of snow for a slide test. Will the digging never stop.

This went pretty quickly.

We broke for a rest and some lunch...Marlys and I had frozen PB&J's.

Benny though showed us his premium three layer PB&J that he had learned needed to be made with PB on both sides of the center slice of bread to prevent soggy center slices.

It is amazing what we learn out here.

This is also where Marlys taught me how to drink out of a Camelbak with a frozen hose. She is amazing, and this did save my bacon (but not before the dreaded tree visit). Note to self, you either need to bring liquids in bottles or a long straw.

After this rest, standing around in the snow, with skiers going by asking what the pits were telling us, it was back to the snow pits.

The last test involved someone standing on top of the blocks we had dug out and stomping to see if and where the snow would slide.

Ours did at about the two foot level, but it took a bit of jumping to get it going. All-in-all pretty stable at this point on the mountain, at this time, etc (many qualifiers needed here).

Before Marlys and Samatha would collapse their pit they wanted to have a portrait of their work.

Theirs too collapsed, but it was pretty stable in their area.

And in keeping with "leave no trace". We got to put the snow that had been shoveled out of the pits...back into them. This went quicker.

The rest of the afternoon was spent doing different rescue scenarios, running around in snowshoes up, down, across the slope looking for beaconed buried victims.

We ended the day with a two victim search, one with a beacon and one without. It took us 17 minutes to find and extract them both. I found the beacon-less victim (a buried backpack). I would like to say it was do to skill and experience, but.....

About 4pm we called it a day and headed to the Salida Cafe for some warm coffee, then home. It was a great day playing in the snow. I was a beat puppy, but Marlys was still her normal exuberant self.

I think our next alpine training is going to be on St. Mary's Glacier to work on self-arrests, roping up, belaying, etc. in the snow. We are on the look out for another ice axe and two pairs of crampons...hello craiglist/ebay.



Note: I mentioned all the qualifiers on the testing for avalanche conditions. Well yesterday there were two avalanches at Monarch Pass and one caught a skier, luckily a DOT crew saw his ski pole sticking out of the snow and got him out.


Tuesday, February 08, 2011

Strange Hawaiian Petroglyphs

What can I tell you, when you are walking lava covered beaches you tend to look down (so as not to face plant) and you can see things that can cause you to question your reality plane.

While walking a beach on the west side of Hawaii, in the Kona district we came upon a number of petroglyphs, actually rock engravings, but I don't know what those are called.

One of the first ones we came upon would/should be part of a "Chariots of the Gods" investigation for the History Channel, as it appeared to represent an alien being.

Not sure how old it may be, but as you can see it has Spook-like ears, an SNL cone-head cranium shape and if you look closely there are faint antenna like "My Favorite Martian".

I guess if I were visiting earth, why go to somewhere the weather is an issue , e.g. Minnesota in January. I too would land in Hawaii as I guess these extraterrestrials did sometime in the distany past.

The next rock engraving changed how I understood that spread of Christianity to the islands. I always understood it to be Catholic Missionaries in the 1800's.

This engraving would seem to indicate that the Lutherans made it here first, and far earlier then the 1800's, it is a rock engraving after all.

From the looks of it, it was probably the same Lutheran sect that now makes the little chrome plastic fish seen on many car bumpers.

We didn't find any with the minnows following so that must be a more recent addition.

The last engraving I found the most amazing. I always understood the initial discovers, from my small understanding of island history, to be the Polynesian tribes moving north from the South Pacific islands to lay claim to the Hawaiian Islands.

This engraving would indicate that another tribe made it here also, namely the Martini's. I felt proud of this since, I to partake in one of there current daily worship sessions called "Happy Hour".

I think this also proves that the sacred drink should always be drank "up" and with an "olive", although I am not sure where they got olives on the islands, but may indicate the Martini Tribe developed in the Mediterranean area.

Thursday, February 03, 2011

Winter Encampment 2011 & Dash - Kona

The end of January the retirement roadshow moved from Colorado to Kona, HI, for a week.

The warm, humid weather we faced getting off the plane was in sharp contrast to the day before, where we were doing on-mountain avalanche training at Monarch Pass.

The objective for the trip was to do a shorter version of the Cannonball Baker Sea to Shining Sea Memorial Trophy Dash. In our case it was going to be from the south side of the island, to the north end. We had the whole week to accomplish the feat.

We started the event by first provisioning at Costco, which was made easier by our traveling companions, Bill and Cathy from Buurmidji, MN. Cathy brought this amazing clown car of a suitcase that she kept pulling things out of from food to coolers.

Also they had the Costco membership.

On the way to provision we also rolled into Aloha Woods, where I picked up some Chocolate Heart, Koa and Macadamian wood to feed my current OCD phase around bottle openers. This of course required the purchase of another suitcase to get the lumber back to Colorado.

After the torture of provisioning, we could not start the Dash. We spent the rest of the day lounging by the pool and since we didn't want to start in the dark, the start time of the Dash was put off until the next day.

Our starting point for the Dash would be South Point, the most southerly spot in the U.S.A. After a bright and early start (we were still on Central and Mountain Time), we got there a little before 11AM for the official start. There were no starting flags or cannon shots, since we were going low key to avoid attracting the attention of anyone wishing to derail our attempt at the establishing the Big Island Dash record.

We simple took a picture.

Then the team, with the clock now ticking, decided a hike to a noted Green Sand Beach was in order. We anticipated doing this pretty quickly, so it shouldn't hurt our overall time too much...and what the heck we were here, it was here, so why not.

About four hours later we made it back to the car. The beach turned out to be a 6.39 mile round trip hike on volcanic rocks and sand. It always seemed to be over the next ridge.

We jumped back into the magical Mazda and off we went. Actually, we kinda slumped into the car and decided to have a picnic lunch in the AC it provided. But by mid-afternoon we were on our way north.

Late afternoon brought us back to the Kona area and we had gone about 60 miles in a couple of hours. Long, traffic free stretches of road on which to open up the Magic Mazda did not seem to be happening. We decided to call it a day, and retire to the condo instead of continuing in the dark and possibly hitting a wild goat or donkey, on what we anticipated to be a fast transit across the lava field north of Kailua.

After waking the next day, and realizing we may have over done it yesterday, we decided to take a Bye Day (just like the NFL) and went to a beach that Bill-Our-Leader had picked out. It would also allow us to scout the area just north of Kona for the next leg of the Dash.

Our overall elapse time was suffering a little bit as we were now 48 hours into the Dash and only covered about 60 miles, but it was felt we could make it up at the end.

The pressure of the Dash was starting to weight on the team. In order to put us in the right frame of mind we went on a tour and beer tasting at Kona Brewing. This went well! We were especially fascinated by their rodent control management system, which seemed to be everywhere at once. Here in Colorado we would have used a cat, but they had a real machine, an Indian Mongoose running around. I have since looked into getting a breeding pair for Pinon Rock, but alas they cannot be brought into the US (Other then zoos) as they can be detrimental to cat union, and tend to decimate the local critter populations.

We awoke the next day with only thoughts of getting back into the running on the Dash...you betcha. No, the team decided after a day soaking in the sun and tasting the local barley pops, another rest day was in order.

Even the NFL teams take a whole week, so what would another day mean in the scope of things.

We went looking for volcano's and beaches with different color sands and since we knew the way south we ended up backtracking the only progress made so far on the Dash...back to South Point and points east.

We did though scout an alternative route on the way back, through Hilo and the Saddleback for our return once we make to the North Headlands of the island, but it too proved for naught.

At the end of this bushwhacking through Hilo rush hour, road construction and the abdication of our leader (Bill), we decided to re-group back at the condo. The lack of a clear leader and chain of command would prove to be challenging in the days ahead.

We were now 72 hours into the dash and have gone only 60 net miles, an average of only .833 miles per hour. The team knew we were way off the bubble, but hey tomorrow is another day.

After the trials and tribulations of the day before the now leader-less team decided another day at the beach was order. We took another rest day to contemplate...well things.

For those keeping score at home we were now 96 hours into the Dash, and made only 60 miles toward our goal...boy, do we suck at this Dash thing.

So here we are with only two days left to complete the journey and what does the leader-less team decide to do...you got it, lets take another rest day to recharge for what would be our final push to gain the finish before getting back to the airport on Sunday night for the red-eyes home.

As the team seems want to do on rest days...we went to the beach. Here we discovered some unusual petroglyph's that will be covered in a subsequent post, due to their importance.

Score: 120 hours - 60 miles.

So it is now our last day on the island, the team hit the road bright and early, at the crack of noon.

Our travel up the previous scouted route (it has now been scouted 3 times, while on the way to our favorite beach) went uneventfully, right up to the point a detour to Waimea was decided upon by the leader-less team. And a stop for lunch. And to watch the first quarter of the Superbowl. This detour cost us the most direct route to the finish line, we now had to transit an up-mountain area to get back on course.

I won't keep you in suspense, we did make it to the finish line, as this picture of the headlands can attest. It was a journey with many different turns to it, especially since we were leader-less.

The final finishing time was just under 144 hours to cover approximated 120 net miles for an average speed of .833 MPH. We never made up our time deficit from the first day, but the team endeavored to finish no matter the obstacle.

We were able to limp back to the airport with our heads held high...we had finished!

On to the next adventure.




Monday, January 17, 2011

Another Bottle Opener & Updates

OK, its been a while, but we've been busy...bla-bla, bla bla bla.

Since the dresser, I have only been making bottle openers. This one is made of Padauk and is going to a neighbor that made be a couple of knobs for some planes in need of new ones.

I have a couple of ideas for future ones and will keep you informed. I would like to dye a tiger maple one next time.

Marlys and I had a number of folks stop by at the turn of year on their way either to or from the southwest. They couldn't have picked a nicer winter (so far) for coming by since it has been comparatively warm and we have had little snow (La Nina) in the area.

Derek also spent most of the month of December with us, which is probably the most he has been home since going off to college in 2006. He had a happy surprise when he got back to NMSU in January, in that they informed him that he would now be a full Teaching Assistant(read more money, real good news for Mom and Dad), and would now be teaching three classes.

Beyond that Marlys and I have been going to training given by the local Search and Rescue Team (since October actually), which maybe we will get voted on to someday. The training alone though has been invaluable; so far we have worked on high and low angle evacuations, medical triage and limb splinting, participated in a mock mission, had a introduction to avalanche beacon usage and search techniques, completed our initial FEMA Incident Command System classes (online via the Emergency Management Institute) and map reading.

Next week, we are going up to Monarch Pass for on-snow avalanche training (day before we head for Hawaii) and next month additional classroom and field map training.

As I mentioned the training the folks on the SAR Team have given us has been great, and we will use it, because we are going to try and go up one 14er a week this summer, when we are around and conditions permit. We have added Antero, Shavano/Tabeguache, Belford and Oxford to the list.


Monday, December 27, 2010

Wooden Church Key, i.e. bottle opener

No its not a sap, its a bottle opener.

The original idea came from a blog post: http://blog.woodworking-magazine.com/blog/New+Contest+Build+A+Woodworkers+Bottle+Opener.aspx , but I kinda went in a different direction.

This is made from some scrap tiger maple laying around the shop. I took me a couple of hours to make.

There is a magnet in the top to grab the cap off the bottle when it comes off.

Notice that there is a finger recess in the top to direct the index finger when operating.

I used a couple of stainless steel screws, which have been inserted into a critical depth to assure ease of use.
It was a fun afternoon project. I gave this one to Derek, in his sock for Christmas, so at least one or two more will be needed for use around here.

Wednesday, December 15, 2010

Moving the behemoth

It sat in the shop for a month. Today it went up to the house.

First it needed to lighten it up, so two people could lift it.

Out came the drawers...all 14 of them.

Off came the back.

And finally the top was removed.

We unceremoniously strapped it onto the ATV, so it could be taken around to the back porch, reducing the steps needed to be climbed and straightened the path through the house.

The entire move turned out to be less epic then I expected and after 30 minutes, or so we had it in place.

After Marlys was done reloading her stuff, I too had space for my stuff...the lower right hand drawer.




Posted by Picasa

Monday, December 13, 2010

Finally its done.

Marlys' dresser is now done, but the challenge is going to be getting it up into the bedroom. I bet that even with the top and drawers removed this is a 150-200# lift.

For those wondering the drawer knobs are paduek.

Finished with a coat of Sealcoat (shellac) sanding sealer, and multiple coats of satin BLO/Tung/Poly.
Posted by Picasa

Saturday, November 20, 2010

Dresser Chapter 2

The pile of wood is virtually gone and the dresser has moved into a stage where Marlys is getting involved.
The carcase, face frame, top and ends are done. The next step involves making all of the drawers and there will be many (14). So far no mechanical fasteners have been used, only Titebond glue, but I think figure-eights will be used to fasten the top to allow for wood movement.
The drawers will be made individually (i.e. not production mode) to account for any differences (i.e. mistakes) there may be in the build. Of course, since I have done such a great job there are none (ya, you betcha). At least none that I haven't been able to either fix or hide, so far.
The drawers will have dovetailed fronts with plywood sides and bottoms. As I mentioned before they will slide on UHMW tapes in all four corners.
I have been thinking of putting a sign on the stump, where the tree came from being used in the dresser, saying what happened to it. I sometimes wonder when I am walking through the trees and come across a cut stump what happened to the tree.

Friday, November 12, 2010

The Dresser Begins

Let me start by answering a question posed by two folks from, I believe, last week.

What is a slash pile?

What you see pictured is a slash pile. It is made up of the branches and shrubs cut down during the summer, mainly for fire mitigation.

There are at least five piles around the property that will be burned during the winter.

This week the dresser started to take form. The carcase pieces were sawn and the glue up began.

As you can see the need for clamps is extensive.

This glue up took me between 2-3 hours (I work pretty slow) with clean up from the squeeze out. The carcase is made of 3/4" cabinet grade Maple plywood. It will be faced in beetle kill Ponderosa Pine, more on that later.

While waiting on the glue to dry, the drawer fronts where cut to rough size and the grains matched for compliment.

The entire front edging and drawer fronts are coming out of one fitch of wood for consistency.

I won't start the drawers until the carcase is completed, with sides, legs and top.

I am planning to dovetail the fronts to the drawer sides and use UHMW for slide facing in the carcase.

The drawer pulls will be something dark probably Padute, as there is still some around the shop.

The larger glue up panels, for the sides and the top, will also come out of one fitch, which is the next section down from this one on the same tree.

What I mean is that the fitch for the front came from the top of the tree and this one will be from the log just below it. There should be consistency, but we will need to see.

The fitch for the top and sides came off the mill much more usable form, as it was cut after I put on new belts which virtually eliminated the vibration I was getting in the mill head.

Those of you with mills remember to de-tension the saw blade when not in use so as not to flat spot the belts.

The wood stickered under the sawhorses is the fitch for the top and sides.

BTW, the dresser will be slightly over 7 feet long and 42" high. When done it could weight 150-200#.

Yes it is a big one.

Next step is cutting and gluing on the front edge of Ponderosa to each piece of plywood.

This will also exercise the complete inventory of clamps.

Most everything is cut, but there will be fine tuning as the pieces of the puzzle are glued and clamped into place.

I hope to finish this up on Sunday.

Marlys has also been in the shop most of the week making some items, and refurbishing the ten year old wood bear statue we have on the patio. I especially like what she did with the eyes and lips.






Monday, November 08, 2010

Military Flyovers

I think I mentioned this in a previous post about nighttime helicopter flyovers up here, and yesterday afternoon I had a couple of herky bird's flyover the shop at about 500', it now looks like these may become more widespread.
Here is a picture from the Wall Street Journal. We are 28 miles southwest of the Pikes Peak (west of Colorado Springs), which looks like it puts us in the north central area of the proposed area.

These flyovers are not that often, nor disruptive, being a hanger rat I find them interesting in that some of the aircraft are not seen that often, especially making low altitude flybys.

So far the most unusual were the Osprey's making touch and goes at the Gunnison Airport a couple of years ago.

It does make you think about the area we live in, when the military says it is a good stand in for Afghanistan.

Wednesday, November 03, 2010

Trip and Hike Plans for 2011

OK, OK, OK, I received a couple of notices that I haven't written anything in a couple of weeks wondering what gives...

Well, we have been busy with the mundane, which I am sure you don't want to hear about, e.g. putting things away for winter (good thing since a week ago Monday was the first snow fall), looking through the slash pile for shop stove wood and getting the dresser project and Molesworth chair project lumber ready to go. Along with our daily hikes and horse duties (which have come to an end, for now, since "Puff the Magic Flashlight" is now back home.

We have during the course of these tasks had conversations about trips for 2011, Hawaii in January is already locked and loaded, and a southwestern camper excursion is on the slate for late February.

But we have started planning for the actual trip for which the truck camper was envisioned... which would be to Alaska. At this point it is looking like a mid-May launch and will last 6-8 weeks.

The Gypsy Camp-in is on the docket for September, which we missed this year.

Oktober Fest is also tentatively scheduled for September 2012.

On another note the list of mountains for 2011 seems to be growing. Right now Massive and La Plata are tentatively scheduled, but Pikes (which would complete all of the Front Range 14ers for me) is also creeping on to the list.

Also from a county "high pointing" perspective I would like to go up Bushnell Peak in the Sangre De Cristo range, as it is the highest point in Fremont County (where we are located) at 13,105'. Although not a 14ers it looks like a challenge from the trip reports I have read. It is part of a complex of peaks that folks seem to hit all at once to include the Two Sisters and Red mountain.

Right now my feet hurt, but there is nothing like an objective to work them back into shape.

Tuesday, October 05, 2010

Chairs, Chairs, Chairs

Sorry, I know it has been a while since my last post. We have been down to Las Cruces to visit Derek, and Marlys had "Da Gurls" here for a week.

Just to bring things up to date, it is FALL here in the mountains and most of the leaves have turned and dropped. The temps have dropped too, but it is still real nice when the sun is out. Yesterday, we had a few minutes of sloppy snow during a shower and more is forecast for early next week.

We even fired up the wood stove in the shop yesterday.

There are many projects on line right now, one that has turned out nice is the painting of the Skiadirondack Chairs (vs. stained and sealed), which have added some color to the patio. Marlys has been matching the color to the skis...or vice versa. The oil enamel paint really puts a solid finish on the chairs for the winter.

Pretty soon the fire pit will need to be moved in to place and replace the table, but we have a fire ban in effect right now.

We also have a new bench in process for visitors to use in removing shoes at the door. Marlys is doing some wood burning on it, but we hope to have it ready in the next few days.

I have also spent a few hours working on the design and measurements for a "Molesworth Club Chair". which has been pretty enlightening.

Thomas Molesworth who is noted for his Cowboy style furniture is also noted for never having used plans. So for those of us attempting to recreate his pieces it can be a real challenge. I have relied on information available from other builders and photographs. Using this info I have made a mock up out of OSB, and remade the mock up, and remade the mock up.

The first one nearly gave me a concussion, when I set down in it and it went right over on its back...I guess the back angle and center of gravity were wrong. Well that is what the mock up was for...testing the design, not ending up on my back in the shop...just missed smacking into the vertical vise on the side of the workbench.

I guess a clear space should be on the mockup check list...and maybe a mattress to land on.

25 degrees of back angle was too much. So, I went back to the web to see if there was a rule of thumb for back angle I should start with as my work with a protractor and photographs was not working.

Luckily, I found some good info at a Cornell University site. This got me into the ballpark, at least I wasn't tipping over. The second version of the mock up had a total back angle of 15 degrees. OK but not just right. Since, I hadn't flipped on to my back this time I could check some of the other dimensions. The arms were too low and the seat pan was too long, also the seat height was OK, but since this is a club chair (for lounging), it could probably be a little lower.

Marlys sat in it and blew the arm off. This was after all a mock not a real chair and was only held together with a few screws.

So back to the drawing board.

5 degrees was added to the back angle, the arms were raised 2 inches, the seat pan was narrowed 2 inches as was its depth.

I also sawed the uprights for the arms to check proportions and work out the log diameter for the back.

I am still fiddling with the dimensions, put this is what the mock up looks like right now.

The coffee cans on the upright was to gauge different diameters for the rear milled log uprights.

The arm uprights are at two different setbacks from the front of the seat, as I am still looking at that.

The tape on the bottom was so that an accurate angle measurement could be made.

I still don't like the visual proportions of the seat base to the overall chair size, but that is for the next version of the mock up, at least this one didn't try and kill me when I set down in it...very gently.


As I began this post there was a deer sitting outside the office window. I stayed there for a few hours and didn't seem to be too bothered by the dogs or Marlys going out on the back porch (deck).
As you can see we are kinda green...we (actually Marlys) sometimes uses a clothesline.
Next week, the milling of the boards for the dresser begins.
And the next chair mock up.

Sunday, September 19, 2010

We went to a ski swap and ended up at Oktoberfest.

We went in search of skis for a red Adirondack chair. We had in mind a ski swap we had gone to 15 years ago at the Minnesota State Fair grounds one Fall, where there were piles of old skis going for $5 a pair.


What we found in Breckenridge was not that. These were skis mostly in the year or two old category with near new prices. Needless to say we didn't pick up any chair skis, these were too nice (and expensive) to cut up. BUT, I will not forget this swap next time I need skis.




It was a great fall day in the high country and the ski swap was not our only reason for going to Breck. The aspens are turning and the summer tourist traffic is gone...mostly.


Marlys and I crossed the bridge from the Riverwalk Center and were transported to Germany.



The Summit Band was playing polkas, the beer was cold and on tap, and the brats and sausage were being grilled.





Its hard not to be content with this combination.





We got a Paulaner Pilsner sat down near the band and enjoyed the afternoon.





Although there were quite a few folks in attendance it wasn't armpits and assholes crowded, just enough people to make it nice.


We talked to couple from North Dakota that have lived in Breck since 1991...as expected they were able to polka pretty well.


All in all a great day!

Friday, September 17, 2010

14er season done for the year... for me.

Five 14ers were hiked/climbed this year. Two were for the third time and two were milestones; namely the highest-Mt.Elbert and the most difficult (for me) Longs Peak.

The Everest Base Camp Trek has been postponed due to items beyond our control.

Next year there are three 14er's currently on the list; Huron, Massive and Pikes.
Posted by Picasa

Tuesday, September 14, 2010

The Mundane Work of Fall

Its fall in the high country and the Aspens have started their turn along with the Ponderosa's getting yellow needles. It also is time to get the tasks done that were suppose to have been done during the summer, but alas they didn't.


Beyond the completion of the pergola, there were three major items scheduled for last summer; cleaning and resetting the fill float in the cistern, getting the wood stove installed and the chimney but in and prepping the wood for the dresser construction this winter. I can now same I almost have them done.



About a month ago we picked up a 500 truck tank off of Craigslist. This was the prelude to the cistern work as we needed away to re-fill it quickly once it was drained and the inside work was done.




We also planned on using it to re-fill the hot tub which hadn't had the water changed in almost a year. The last time we re-filled it from the well and due to the alkalinity it seemed that we needed to add allot of chemicals to get everything balanced. Also the ozone generator need to be "re-newed".


Now with a truck tank we could pickup municipal water in Canon to re-fill the hot tub. About getting water in town, that required an inspection that the plumbing used to fill the tank would not allow any backwash and the setting up of a bulk water account with the water department. Water currently costs $6.04 per 1000 gallons and is purchased at a self service station in town.


Once we had everything squared away with the bulk water we re-filled the hot tub and then picked up 500 gallons for the cistern work. I turned off the well pump to draw down the cistern, but after three days, it had gotten down to about 8 inches and we moved ahead with the inside work. The challenge was getting into the cistern through the manhole cover. A ladder was cleaned and inserted then I attempted to squeeze in... and it was a tight one. Once inside I did the appointed tasks got out and dropped the 500 gallons in.


While it was filling I also installed a tank vent, which we never had and tried to calibrate the very scientifically designed tank gauge sticking through the cover.


I filled it to capacity with ~1200 gallons of bulk water, so that meant that the cistern still had about 500 gallons in it when the work was done (1700-1200=500).


I restarted the well pump and began taking meter readings on the gallons pumped out of the cistern on a daily basis.


The other project awaiting completion was the shop wood stove. As you may recall we bought a wood stove at the end of last winter when the they were on sale. I waited until now to buy the chimney because...well I needed Simpson Duraplus sections and Home Depot didn't have any in stock until the last month. The chimney will end up costing more then the wood stove.


There is a stage 1 burning ban going on right now so the stove will not be fired up for a while.


It is mostly installed but I will need to put another one foot section on top to get the clearance spec'd by code and the manufacturer.

I at least have it straight and plumb.


A CO and fire detector are also on the list for the shop before we really start using it, but it should be better then the propane construction heater used for the last few years.


Speaking of the shop, a few things needed to be cleaned up concerning the entertainment feeds...the TV dish and FM antenna have been just sitting on the ground next to the shop all summer and a more permanent location was needed.


The wood needed for the dresser has been saw and is stickered outside drying. That is old plywood sheltering the wood from rain and direct sun.

It hasn't been surfaced or squared up yet which will be a task for after the official start of fall next week.


Also there was a great post on the Hermitage blog concerning building and living in BFE, as Pat P. would say. Here is the link to Leland's Great post .

Wednesday, September 08, 2010

Finally saw a Tarantula

Over the years I have heard about the Tarantulas migrations(?) that happen near Canon City. I have heard them mentioned during the news broadcasts in Denver, and last week in Pueblo, I heard a guy talk about them swarming (probably not the right word) over the Pueblo Community College in Canon City, which he surmised was built in the middle of one of their routes.

In reading about the Tarantula's activity in the area them seem to be mostly in the Arkansas River area. It also seems the this is more of an annual mating ritual then a migration.

Seems that only males are out and about and they are smaller then the females that stay in their burrows. The mating season is from August to November.

Anyway I saw mine on Colorado 9 just before the junction with US 50 by the Royal Gorge. I can't imagine many survive crossing roads as they don't move too fast.

Saturday, August 28, 2010

Longs Peak


As I sit here Saturday morning to report on the trip up Long's Peak on Wednesday, I learned that the mountain claimed a climber on Friday, when he fell 800' from a ledge. Along with the climber that was blown off the top in June, this makes two that I know of this year, along with at least one climber being struck by lightening.

In chronicling my trip up I videoed a number of the different areas. Because the start was at 2:30am and I was using my little Cybershot point and shoot camera the first few videos are pretty dark. All of the embedded hyperlinks are to the videos which are loaded on Picasa.
Speaking of dark, we planned this trip for a full moon to have more ambient light. In fact Phoenix really reveled in it, but after almost twisting my knee I decided that the chance of a injury out weighted the coolness factor of hiking in the moonlight, so on went the headlamp. The headlamp worked really well. I bought it at Harbor Freight for a whole $4.99. This may have to be added to the HF Gems list.

Knowing that we needed to get out early, since we anticipated a 14 hour trip, we slept in the campground in out cars on Tuesday night. I woke up at 1:45am and the operation moved over to the trail head, I want to say so as not to bother the other campers, but really because the toilets were closer over there.


The trail had an incredible amount of horse crap on it, making watching your step import, beyond even the possible twisted limb. It took quite awhile to work out of the trees, and we were passed by several groups.

In the Trees, as we got closer to treeline the trees were fairly stunted, testifying to the amount of wind that can be present on Long's. The forecast was for 5-10mph and decreasing, so we weren't really anticipating the wind being a factor in the climb.

Once out of the trees the lights of the Front Range came into view. You can be so isolated on these treks, yet when you see the lights it brings up the paradox of the thousands of people not really that far away.

As I moved higher out of the trees the headlamps of the people ahead of me could be seen weaving their way up to Granite Pass. The wind also started to come up and blocks some of the things I am saying.
After three hours the sky started to lighten, but the head lamp was still needed. It also was the about this time that I stopped waiting for Phoenix and decided that I would move on alone. I thought about this decision more after I made it, then when I made it. I figured that I felt good and at this point had waited a couple of time. Phoenix had said he was going to move slowly to savor the experience and stop to take pictures. I figured that I would have just so many hours of reasonable activity in me and I was concerned that I would use them up in waiting, leading to a collapse either before summitting or on the way down. I also rationalized that there were a number of people on the trail to provide support, if needed. I don't know if this was right or selfish, but it is what I did.

About this time the sunrise finally got into full swing and I could start to see the terrain around me.

As I climbed through Granite Pass, Long's came into view and the timing was perfect to see it bathed in alpenglow. This was my first really good view of the mountain and the Diamond big wall on its east face.

This was also the beginning of the Boulder Field, that featured prominently in most of the route and trip narratives I had read. I have to say that it lulled me in, in that it didn't seem so bad at this point.

About half way through I came to the campground for the folks that come up the evening before to shorten the trip a little. Speaking of the trip length I figured on 14 miles according to the route guide, but Google had it at 14.5 miles and after adding up the mileage on the trail signs I had it at 15. This may seem trivial, but after hours on the trail, I becomes very important.

At this point the Boulder Field got pretty serious. The trail had competing cairns on it, so as I watched different group moving through it, it kinda became everyone for themselves. I followed a group that seemed to have confidence in the cairns they had targeted...until about halfway through when their creditability came into question and I set off on my own. Seemed to work out OK until topping the field and trying to figure out the climb into the Keyhole, the transition to the backside (I wonder if a mountain has a backside) of Longs and the next stage called the Ledges. At this point I thought it would have been nice to be following someone to see how they got into the Keyhole.

I was feeling pretty good and according to the route guide at 14er.com it was less then a mile to the summit. The challenge of the Ledges brought me back to reality as the trail was narrow, hard to identify and had pretty serious exposure. At one point, I was reaching around a badly placed boulder to continue on. I started to realize that the step from a Difficulty 1 hike/climb, to a 3 was pretty serious, and although this was not considered a technical climb it wasn't for those with little to no experience, even though I would overtake a group from Ohio that had chosen Longs as their first 14er.

I thought I was prepared for the next section which in my mind represented the crux of the entire climb...The Trough. Phoenix had warned me that it was a straight up climb for about 600 feet, but the sliding scree with each step really brought it home. Looking up the Trough at the climbers already up it set a scale to this place that was pretty overwhelming. As I looked at a couple of the boulders pretty much teetering on rim along the top, the term "act of god", came to mind as a possibility.

Up until now this was the hardest part of the climb for me and it seemed to go on forever, then on reaching what I thought would be an easy exit from the Trough to the Narrows, I realized that there was no clear exit and I had to climb to an extent that I was grabbing cracks in the rock and pulling my 190#s up and over the upper rim. My thought during this was how the hell would I get down and back into this gauntlet on the way back. I was so happy to reach the end and the entrance to the Narrows . This traverse across a rock face to the Homestretch was pretty intimidating, even more so then the Ledge and it was hard to see the path once across.

I just wanted to get through the Homestretch and on top. The surprise of the Homestretch was unexpected in that I figured it would be a walk up some cracks in a rock incline to the summit. It was more of a crawl using the cracks for handholds to another 10-15 foot climb at the top onto the summit. A miss here and you would be sliding a pretty long way. Which again brought up the question of how to transition back on to this stretch from the top when returning.

The Summit was pretty enormous, with about a dozen folks already there. The conditions were prefect, no wind, severe clear sky, all in all a good place to recoop a little before getting back on to the task of getting down.
I arrived here at 9:30, 7 hours after leaving the trail head. It normally takes me about as much time going down as, coming up. So I figured on a 14 hour round trip.

This picture is looking to the northwest.

I stayed on top for about 1/2 hour waiting to see if Phoenix would arrive, but at 10am I started down figuring I had 7 hard hours ahead of me.

The beginning being getting back down on to the Homestretch. I waited a few minutes to watch a couple that looked experienced and they slide on their butts most of the way down the stretch. I did the same and at the bottom they called this 5 pointing (hands, feet and butt).

Even though I had been across the Narrows, I didn't go fast back across it, the entrance to the Trough or down the Trough, because now I knew what I was in for and the exposure always looks greater when going down and generally facing away from the slope. On the way up you tend to fall into the terrain, while when going down you tend to fall away from it.

At the bottom of the Trough I finally ran into Phoenix, where he snapped this pic. He said I looked strong, but I don't know about that.

We talked for a while and he figured he had another 90 minutes before hitting the summit. I figured he was about 2-3 hours behind me at this point.

He continued up and I headed down. I still had misgivings about separating earlier, but he seemed to understand that we were moving at two totally different paces. Hindsight would say that a preliminary hike would have been in order to gauge our pace compatibility. Maybe some radios would have been of use in helping us stay in contact.

I got down through the Keyhole and back to the upper campground about 12:30. At this point my Camelbak had been drained of 3 liters and I refilled it with the only 2 liters of additonal water I was carrying.

The road apples in the trail question was also answered as a Ranger was checking out the camp and had 3 llamas in tow. Sorry horses.

The rest of the way down was long, but uneventful. It took me just under 14 hours.

Phoenix told me the next day that he summitted at 2pm, and reach the trail head at 11:30 that night for a 21 hour trip.

Although in past hikes the group had been separated somewhat by pace, usually in the 5-10 minute range, this separation made feel very guilty. Although it didn't seem to bother Phoenix, as the instigator it bothered me.